Knight's Sword
Here are instructions for making a knight's sword for your outfit.
You will need:
Corrugated card (an old box will will work fine)
sticky tape
Kitchen foil
Instructions:
Cut out two blade shapes from card. Fold each in half to create a ridge down
the side of the blades.
Cut a strip of card about 4 inches (10cm) longer than your blade. Arrange the
two pieces of blade so the ridges point out and the strip of card runs through
the middle, sticking out of the bottom. Wrap sticky tape around it to secure.
Wrap the blade with kitchen foil. You shouldn’t need glue but if you want to
use it to secure loose edges you can.
Cut two handles from card. Arrange them so they overlap the blade slightly
and have the strip of card running in between them. Wrap tape around to secure
them in place (you will need to use quite a lot of tape)
Jack with his sword, helmet and shield
Back to Knight's theme
Back to Themes
|
